NOIDS.wiki
Calculator
Shop Potency Calculator

Cannabutter Calculator

This cannabutter calculator estimates butter strength: grams of flower times THC percentage times 10, times 0.877 and decarboxylation efficiency, times infusion efficiency, divided by grams of butter or by servings. [1][2][3]

Two questions, two directions. Either you have the flower and want to know how strong the butter will be, or you know the dose you want and need the ratio to hit it. Both are below, and both show the arithmetic, including the two losses most calculators leave out.

The edible calculator runs the same arithmetic for oil, butter and tinctures, with a switch for THCA or THC labels.

Direction one: I have the flower, how strong is it?

The two losses

THC in the butter: 638.46 mg
Per serving: 53.2 mg
Strength per serving: Very potent (Take care). Very high for one serving. Split the batch into more servings to bring each one down, and wait at least 2 hours before taking more. Dose tiers in the edible dosage guide
Strength of the butter: 3.19 mg per gram
Ratio: 3.5 g of flower per 100 g of butter

7 g x 91.21 mg per gram (1000 x 20% x 0.877 x 0.8 x 0.65) = 638.46 mg, over 12 servings.

Direction two: I want a dose, how much flower?

Use 2.63 g of flower

Same two loss figures as above. Change them there and this answer follows.

10 mg x 24 servings = 240 mg needed, divided by 91.21 mg per gram of flower.

The ratio, in plain terms

Most recipes are written as one ounce of flower to one pound of butter, which is roughly 6.2 g per 100 g. That is a strong batch and it is where a lot of people start by accident.

Flower per 100 g butterOld moneyStrength
1.5 to 2.5 gabout 7 to 11 g per poundmild
3.5 gabout 16 g per poundstandard, the default above
6.2 gone ounce per poundstrong
12.5 gtwo ounces per poundvery strong, dose by the teaspoon

Why this answer is lower than other calculators

Two steps get skipped almost everywhere. THCA becomes THC at a mass ratio of 0.877, because the molecule sheds a carboxyl group, so the number drops before anything else happens. Then no home decarb converts everything and no infusion extracts everything. A calculator that ignores both reports roughly double what you will actually eat.

What this assumes

  • The label percentage is honest. Flower is often tested optimistically.
  • Your decarb held its temperature, 110 to 115 C for 30 to 40 minutes.
  • The butter was held at 70 to 85 C and never boiled.
  • The infusion was stirred well, so every spoonful carries the same dose.
  • Nothing here knows your tolerance, your body, or what you last ate.

Edibles take 30 to 120 minutes to arrive and last 4 to 12 hours. Wait two hours before deciding a dose was too small. Label the jar and keep it away from children and pets.

The method itself is here: how to make cannabutter, with the decarboxylation temperature chart for step one, the edible dosage calculator for a finished recipe, and the potency calculator for tinctures and oils by volume.

Holding both temperatures accurately is most of the difficulty in the two efficiency figures above, which is what a NOIDS Herb Lab is for.

Frequently asked questions

How do you calculate the potency of cannabutter?

Multiply the grams of flower by the THC percentage and by 10 for milligrams of THCA, by 0.877 for decarboxylation [1][2][3], then by both efficiencies, and divide by the grams of butter for milligrams per gram. 7 g of 20% flower in 200 g of butter gives at most 6.1 mg per gram before those losses.

How do you work out how much flower a batch needs?

Run the same formula backwards: multiply the milligrams per serving you have chosen by the number of servings, then divide by the THC percentage times 10 times 0.877 times both efficiencies. The second panel of the calculator does this arithmetic for you.

Why does the calculator multiply by 0.877?

THCA has a molar mass of 358.5 g/mol and THC 314.5 g/mol [1][2]. Decarboxylation removes a carboxyl group as carbon dioxide, so one gram of THCA can become at most 0.877 g of THC. US hemp rules use the same factor to state total THC [3].

Does decarboxylation convert all of the THCA?

Not reliably. How much THCA turns into THC depends on temperature and time, which a laboratory study measured at temperatures from 80 to 145 °C [4]. That is why the decarboxylation efficiency is a field you can change rather than a fixed 1.

Why can the real THC content differ from the result?

The result is only as good as its inputs. In a study of 75 edible products, 17% carried an accurate THC label [5], and an analysis of 201 olive oil preparations found wide variation between batches and laboratories [6]. Treat the number as an estimate, not a measurement.

Sources

  1. National Center for Biotechnology Information. PubChem Compound Summary for CID 16078, Tetrahydrocannabinol (C21H30O2, 314.5 g/mol). pubchem.ncbi.nlm.nih.gov/compound/16078
  2. National Center for Biotechnology Information. PubChem Compound Summary for CID 98523, delta9-Tetrahydrocannabinolic acid (C22H30O4, 358.5 g/mol). pubchem.ncbi.nlm.nih.gov/compound/98523
  3. US Code of Federal Regulations, Title 7, section 990.1, Definitions: "Decarboxylated" ((delta-9 THC) + (0.877 x THCA)). ecfr.gov
  4. Wang M, Wang YH, Avula B, Radwan MM, Wanas AS, van Antwerp J, Parcher JF, ElSohly MA, Khan IA. Decarboxylation study of acidic cannabinoids: a novel approach using ultra-high-performance supercritical fluid chromatography/photodiode array-mass spectrometry. Cannabis and Cannabinoid Research. 2016;1(1):262-271. doi:10.1089/can.2016.0020
  5. Vandrey R, Raber JC, Raber ME, Douglass B, Miller C, Bonn-Miller MO. Cannabinoid dose and label accuracy in edible medical cannabis products. JAMA. 2015;313(24):2491-2493. doi:10.1001/jama.2015.6613
  6. Carcieri C, Tomasello C, Simiele M, De Nicolò A, Avataneo V, Canzoneri L, Cusato J, Di Perri G, D'Avolio A. Cannabinoids concentration variability in cannabis olive oil galenic preparations. Journal of Pharmacy and Pharmacology. 2018;70(1):143-149. doi:10.1111/jphp.12845
Embed or cite this calculator

Publish this interactive calculator on your site or cite its decarboxylation and infusion loss model in your article.

HTML embed code
<iframe src="https://noids.wiki/embed/cannabutter-calculator/" width="100%" height="580" style="border:1px solid #e2ddd5;border-radius:12px;" loading="lazy" title="Cannabutter Calculator"></iframe>
<p><a href="https://noids.wiki/cannabutter-calculator/">Cannabutter Calculator (noids.wiki)</a></p>
Editorial citation

noids.wiki (2026). Cannabutter Calculator. https://noids.wiki/cannabutter-calculator/

Scroll to Top