BUYING GUIDE
A cheap accurate scale improves your edibles more than any appliance. Dose is arithmetic: material weight, cannabinoid percentage, fat volume, portions. Get any one of those wrong and every batch after it is wrong in the same direction, quietly.
The four things worth owning
| Tool | What to look for | Why it matters |
|---|---|---|
| Pocket scale | 0.01 g resolution, 100 to 200 g capacity, tare button | Sets the numerator of every dose calculation. 0.1 g resolution is enough for large batches and not enough for small ones |
| Calibration weight | Matching the scale, usually 50 g or 100 g | A scale that has never been calibrated is a random number generator with a display. Check it monthly |
| Measuring syringes or a pipette | 10 ml graduated, oil-safe | Fat is measured by volume, not weight, and a kitchen spoon is out by a lot more than people assume |
| Moulds with a known cavity volume | Silicone, volume stated per cavity | This is what converts a batch dose into a per-piece dose. A mould with an unknown cavity size makes the whole calculation unusable |
The one thing no home tool can do
Nothing you can buy for a kitchen measures potency. Home test kits give a rough colour or strip reading and are not a substitute for a laboratory assay. This matters because the largest source of error in a home edible is not the scale, it is the assumed percentage of the starting material. If you have a lab report, use its number. If you do not, assume a range rather than a figure, and dose to the top of it.
Putting the numbers together
Once you have a weight, a percentage and a volume, the arithmetic is fixed and our calculadora de potencia does it for you. The method behind it is written out in calculating the potency of homemade edibles, y the edible dosage guide covers what to do with the answer. Losses during infusion and straining are real, so treat the calculated figure as a ceiling rather than a measurement.
Where the NOIDS Herb Lab fits
An appliance helps the accuracy problem indirectly. Because the NOIDS Herb Lab runs a fixed cycle in a marked 350 ml glass, the two variables that usually drift, temperature and volume, stay the same between batches. That is what makes a dose reproducible. It still does not tell you the potency of what you put in.